Smart home for your pool

Your POPP enclosure.
Now truly smart.

The POPP-POOL BLE Controller makes your motorized pool enclosure controllable via web interface, MQTT and voice assistant — with no cloud, no subscription, no compromises.

Order now from €139
All features
★★★★★  Developed & tested by POPP owners

POPP-POOL Control

Battery
100 %
12.74 V · Solar charged ✓

Temperature
17.9 °C

Odometer
989 m

OPEN
STOP
CLOSE

No cloud required

One-time payment — no subscription

ioBroker · Home Assistant · Node-RED

Web interface · local & offline capable

The problem

Your POPP enclosure deserves more than a simple app

The original POPP app is good — but it stops where your smart home integration begins.

Without POPP-POOL Controller

✗

Only controllable within Bluetooth range

✗

No ioBroker / Home Assistant / Node-RED integration

✗

No web dashboard accessible from anywhere

✗

No automation possible

✗

Battery level visible only when the app is open

With POPP-POOL Controller

✓

Control via browser from anywhere in the world

✓

MQTT topics for full smart home integration

✓

Real-time dashboard with battery, temp & odometer

✓

Open automatically when the weather is right

✓

Precise battery level — calibrated against the original app

Features

Everything your pool enclosure needs

Developed by POPP owners — for real-world everyday requirements.

BLE bridge to Wi-Fi

The ESP32 connects to your POPP control unit via Bluetooth Low Energy and makes it reachable over your home network — without any cable modifications.

Modern web interface

Responsive dashboard in 4 themes (Dark, White, Bordeaux, Petrol). Trilingual (DE/EN/CZ). Runs on phone, tablet and desktop — without any app store.

MQTT & REST API

Complete MQTT topics and HTTP REST API. Directly integrable into ioBroker, Home Assistant, Node-RED or any custom system.

Live sensor data

Temperature under the enclosure, battery level %, battery voltage V, odometer and position — updated live every 10 seconds via BLE NOTIFY.

Autopoll & idle disconnect

BLE disconnects automatically when idle and reconnects only for data acquisition. Ideal for solar / battery operation — saves power, delivers MQTT on time.

OTA updates & security

Update firmware and web interface through the browser. HTTP Basic Auth for protected access. Dual partition — no risk of bricking.

It’s that easy

Your smart enclosure in 4 steps

1

Flash the ESP32

Upload the firmware using a flash tool — done in 5 minutes. Already completed in the complete set.

2

Set up Wi-Fi

Connect to the captive portal, select your home network, done. No terminal, no coding.

3

Pair with POPP

Start the scan, select the POPP device, enter the bonding PIN — permanently connected.

4

Control & enjoy

Open the browser, use the dashboard or integrate the MQTT topics into ioBroker.

Technical data

Built for reliability

No compromises in hardware and software.

Microcontroller
ESP32
DevKitC WROOM-32 · 240 MHz dual-core · 4 MB flash
Communication
BLE 4.2 + Wi-Fi
2.4 GHz Wi-Fi · NimBLE stack · automatic bonding
Integration
MQTT + REST
ioBroker · Home Assistant · Node-RED · HTTP API
Web interface
4 themes
Dark · White · Bordeaux · Petrol · DE / EN / CZ
Firmware update
OTA via browser
Dual partition · no brick risk · firmware + web files
Live sensor data
every 10 sec.
Temperature · battery level % · voltage V · odometer · position

Pricing

One-time payment — no subscription, no surprises

You pay once and use the controller permanently. Firmware updates included.

Software
139 €
Firmware license for self-flashers
✓

Full firmware

✓

Web interface + MQTT

✓

OTA updates included

✓

Documentation (PDF)

—

ESP32 hardware

—

Email support

Buy now

Recommended
Complete set
199 €
Hardware + pre-flashed firmware
✓

ESP32 pre-flashed

✓

Full firmware

✓

Web interface + MQTT

✓

OTA updates included

✓

Printed quick-start guide

✓

Email support for 60 days

Order now

Second license
89 €
For one additional POPP device
✓

Second firmware license

✓

Same feature set

✓

OTA updates included

—

ESP32 hardware

—

Printed guide

—

Setup service

Buy now

Support extension after 60 days: €14 / year · all prices incl. VAT

FAQ

Frequently asked questions

Will the controller work with my POPP enclosure?
The POPP-POOL Controller is developed and tested for motorized POPP enclosures with BLE control unit (e.g. Prestige P8). It communicates directly with the original POPP control unit via Bluetooth Low Energy.

Do I need programming skills?
No. In the complete set, the ESP32 is already flashed and ready to use. You only need to set up Wi-Fi and pair the POPP address once — everything is done through the web interface, with no terminal and no code.

Will my original POPP app still work afterwards?
Yes, fully. The controller runs in parallel and accesses the POPP control unit just like the original app. You can use both at the same time.

Which smart home systems are supported?
Via MQTT, all common systems are supported: ioBroker, Home Assistant, Node-RED, OpenHAB, FHEM and any system with MQTT support. In addition, a full REST HTTP API is available for custom integrations.

Are there any ongoing costs or subscriptions?
No. One-time payment — no cloud, no subscription, no monthly fees. Firmware updates are included and can be installed anytime via OTA (Over-the-Air) directly in the browser.

How long does the setup take?
With the complete set, about 10–15 minutes: initial Wi-Fi setup via captive portal (2 min), POPP pairing via scan (3 min), optional MQTT setup (5–10 min). No programming or soldering required.

Get started now

Make your pool enclosure truly smart

One-time payment from €139 — no cloud, no subscription, full control from anywhere.

Order complete set for €199
Ask a question

Developed by TerraBytes · Made in Germany · POPP compatible

Warenkorb
  • Dein Warenkorb ist leer.